All of those wires are over the top of the air box.
Here's what you see when you take the tank off.
All of those
wires are over the top of the air box.
Here's a view showing the PR BAK installed. All of the junk
under the
left side cover has been removed where the 2 bolts are sticking out.
Here's another view from the left
side.
Here's a top view. I
had to relocate the fuel regulator (looks like it's sitting on top
of the K&N on
the left...it's not) and relocate the coils to the right of the fuel regulator.
I
put a piece of 1/4" rubber between the frame and the coils then zip tied it down
to the frame. The coils are to the right of the fuel regulator. I also routed
all of the wires that were over the air box along the frame and zip tied them
down. I know it looks like everything is cramped in but it's actually not if you
could see it in 3D.
Back to Yamaha Raider Modifications Home